Gebruiksaanwijzing LG DR275

DR275S_HA7BLLS_ENG DVD RECORDER OWNER'S MANUAL MODEL: DR275 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface.This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to. Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. This product is manufactured to comply with the EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. CAUTION: CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED AVOID EXPOSURE TO THE BEAM. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner's manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-8 About the symbol display . . . . . . . . . . . . . . . .4 Symbol Used in this Manual . . . . . . . . . . . . . . . .4 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .4 Recordable and Playable Discs . . . . . . . . . . . . .5 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . .6 Regional Code . . . . . . . . . . . . . . . . . . . . . . . . . .6 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . .8 Remote Control Operation . . . . . . . . . . . . . . . . .8 Hookup and Settings . . . . . . . . . . . . . . . . . . . .9-22 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Connecting to the antenna . . . . . . . . . . . . . . . . .9 Connections to Your TV . . . . . . . . . . . . . . . . . .10 Connecting to an Amplifier . . . . . . . . . . . . . . . .11 Accessory Audio/Video (A/V) Connections . .12-13 Auto Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Using the Home Menu . . . . . . . . . . . . . . . . . . .14 Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . .15 General Operation . . . . . . . . . . . . . . . . . . . .15 General Settings . . . . . . . . . . . . . . . . . . . . .15-17 Auto Programming . . . . . . . . . . . . . . . . . . .15 Program Edit . . . . . . . . . . . . . . . . . . . . . . . .16 Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . .16 TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . . .16 Progressive Scan / AV2 Connection . . . . . . .17 Video Output Format / Power Save Mode . .17 Factory Set . . . . . . . . . . . . . . . . . . . . . . . . .17 Language Settings . . . . . . . . . . . . . . . . . . . . . .17 Display Menu . . . . . . . . . . . . . . . . . . . . . . .17 Disc Menu/Audio/Subtitle . . . . . . . . . . . . . . .17 Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . .18 Dolby Digital / DTS / MPEG . . . . . . . . . . . .18 Sampling Frequency . . . . . . . . . . . . . . . . . .18 DRC (Dynamic Range Control) . . . . . . . . . .18 Lock (Parental Control) Settings . . . . . . . . . .18-19 Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Set Password / Area Code . . . . . . . . . . . . .19 Recording Settings . . . . . . . . . . . . . . . . . . . . . .19 Record Mode Set . . . . . . . . . . . . . . . . . . . .19 Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . .19 Disc Settings . . . . . . . . . . . . . . . . . . . . . . . .20-21 Initialize / Finalize . . . . . . . . . . . . . . . . . . . .20 Disc Label / Disc Protect . . . . . . . . . . . . . . .21 PBC / DivX Registration Code . . . . . . . . . . .21 General Explanation of On-Screen Display . . . .22 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-29 General Playback Features . . . . . . . . . . . . .23-25 Playing a DivX Movie File . . . . . . . . . . . . . . . . .26 Playing an Audio CD or MP3/WMA file . . . . . . .27 Viewing a JPEG File . . . . . . . . . . . . . . . . . .28-29 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-34 About DVD recording . . . . . . . . . . . . . . . . . .30-31 Basic Recording from a TV . . . . . . . . . . . . . . . .32 Instant Timer Recording . . . . . . . . . . . . . . . . . .32 Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .33 Checking Timer Recording Details . . . . . . . . . .34 Recording from an External Input . . . . . . . . . . .34 Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-41 Title List and Chapter List Menu Overview . . . .35 VR Mode: Original and Playlist Editing . . . . . . .36 Adding Chapter Markers . . . . . . . . . . . . . . . . .36 Changing The Title Thumbnails . . . . . . . . . . . .36 Making a New Playlist . . . . . . . . . . . . . . . . . . . .37 Adding Additional Title/Chapters to the Playlist .37 Deleting an Original or Playlist Title/Chapter . . .38 Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . . .38 Naming a Title . . . . . . . . . . . . . . . . . . . . . . . . .39 Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .39 Divide One Titles Into Two . . . . . . . . . . . . . . . .40 Combining Two Chapters Into One . . . . . . . . . .40 Moving a Playlist Chapter . . . . . . . . . . . . . . . . .41 Hide a Chapter/Title . . . . . . . . . . . . . . . . . . . . .41 Protect a Title . . . . . . . . . . . . . . . . . . . . . . . . . .41 Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-47 Additional Information . . . . . . . . . . . . . . . . . . . .42 Overwriting Recording . . . . . . . . . . . . . . . . .42 Viewing Title List menu displayed on other DVD Recorders or Players . . . . . . . . . . . . .42 Playing Your Recordings on Other DVD Players (Finalizing a Disc) . . . . . . . . . . . . . .42 Language Codes . . . . . . . . . . . . . . . . . . . . . . .43 Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .43 Controlling Your TV with the Supplied Remote Control . . . . . . . . . . . . . . . . . . . . . . . .44 Troubleshooting . . . . . . . . . . . . . . . . . . . . . .45-46 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .47 3 Introduction Contents Introduction To ensure proper use of this product, please read this owner's manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your recorder. Should the unit require service, contact an authorized service location. Notes on Discs Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. About the Symbol Display Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. " " may appear on your TV display during operation and indicates that the function explained in this owner's manual is not available on that specific media. Symbol Used in this Manual Note: Indicates special notes and operating features. Tip: Indicates tips and hints for making the task easier. A section whose title has one of the following symbols are applicable only to the disc represented by the symbol. DVD ALL All DVD discs listed below. -RWVR DVD-RW with VR recording mode -RWVideo DVD-RW with Video recording mode +RW DVD+RW disc -R DVD-R disc +R DVD+R disc DVD DVD-Video disc VCD Video CDs ACD Audio CDs DivX DivX files MP3 MP3 files WMA WMA files JPEG JPEG files Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. Moisture Condensation Never operate this product immediately after moving it from a cold location to a warm location. Leave it for two or three hours without operating it. If you use this product in such a situation, it may damage discs and internal parts. 4 DVD-RW (Digital Video Disc - ReWritable): DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. [VR mode] Recordings can be extensively edited Playable only on VR mode compatible players (after finalization) [Video mode] Playable on regular DVD players (after finalization) Limited editing features DVD-R (Digital Video Disc - Recordable) These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it. DVD-R discs can be only formatted to Video mode. Playable on regular DVD players (after finalization) Limited editing features DVD+RW (Digital Video Disc + ReWritable) These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. Playable on DVD+RW compatible players (automatically finalization) The edited contents are playable on DVD+RW compatible players only after finalization Recordings can be edited the title/chapter DVD+R (Digital Video Disc + Recordable) These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit it any more. Playable on DVD+R compatible players (after finalization) Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added chapter mark, etc.) Limited title/chapter editing features. Recommended recordable DVD discs DVD-R Mitsubishi (8x, 16x) Verbatim (8x, 16x) DVD+R Mitsubishi (8x, 16x) Verbatim (8x, 16x) DVD-RW Mitsubishi (2x, 4x) Victir (4x) Maxell (4x) DVD+RW Mitsubishi (2.4, 4x) Verbatim (4x) Philips (4x) Note: If a DVD-RW/DVD+RW discs is recorded using a personal computer or other DVD recorder, you cannot format the disc using this recorder. So if you want to use the disc on this recorder, you must format the disc using the original recorder. 5 Introduction Recordable and Playable Discs Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Video CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files. Notes: Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions. Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not be playable. DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens. If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. Regional Code This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or "ALL". Notes on Regional Codes Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit's regional code or the disc cannot play. If you try to play a DVD with a different regional code from the unit, the message "Incorrect region code. Can't play back" appears on the TV screen. 6 a b c d e f g h a 1 / I (POWER button) Switches the recorder ON or OFF. b Disc Tray Insert a disc here. c Display window Shows the current status of the recorder. REC: The recorder is recording. TV: Indicates when the recorder is in TV tuner mode. : Indicates when the recorder is in timer recording or a timer recording is programmed. : Shows the current status of the recorder (clock, program number, etc). d Remote Sensor Point the recorder remote control here. e AV IN 3 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.). f Z (OPEN/CLOSE) Opens or closes the disc tray. g N (PLAY) Starts playback. h z (REC) Starts recording. Press repeatedly to set the recording time. 7 Introduction Front Panel Remote Control b SCAN (m / M): Search backward or forward. SKIP (. / >): Go to next or previous chapter or track. PAUSE/STEP (X) : Pause playback or recording temporarily. d REC (z): Starts recording. REC MODE: Selects the recording mode. THUMBNAIL: Selects a thumbnail picture. CHP. ADD: Inserts a chapter marker when playing/recording. PLAY MODE: Selects a play mode. CLEAR: Removes a mark on the Marker Search menu. TITLE: Displays the disc's Title menu, if available. TV/DVD: To view channels selected by the recorder tuner or by the TV tuner. a PLAY (N): Starts playback. STOP (x): Stops playback or recording. c b HOME: Accesses or removes the HOME menu. MENU/LIST: Accesses menu on a DVD disc. Switches between Title List-Original and Title List-Playlist menu. b / B / v / V (left/right/up/down): Selects an option in the menu. ENTER ( ): Acknowledges menu selection. c d PR/CH (+/-): Scans up or down through memorized channels. DISPLAY: Accesses On-Screen Display. RETURN (O): Removes the menu. AUDIO ( ): Selects an audio language or audio channel. a POWER: Switches the recorder ON or OFF. OPEN/CLOSE (Z): Opens and closes the disc tray. AV/INPUT: Changes the input to use for recording (Tuner, AV1-3). 0-9 numerical buttons: Selects numbered options in a menu. TV Control Buttons: See page 44. SUBTITLE ( language. ): Selects a subtitle ZOOM: Enlarges video image. SETUP: Accesses or removes the Setup menu. Remote Control Operation Point the Remote Control at the remote sensor and press the buttons. Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). Remote Control Battery Installation Remove the battery cover on the rear of the Remote Control, and insert two R03 (size AAA) batteries with and matched correctly. 8 Hookup and Settings Rear Panel a b c d e f g h f COAXIAL (Digital audio output) Connect to digital (coaxial) audio equipment. g AUDIO OUTPUT (Left/Right) Connect to a TV with audio inputs. h AV 1 (AUDIO/VIDEO) Connect to a TV with SCART jack. a ANTENNA IN Connect the antenna to this terminal. b COMPONENT OUTPUT (Y PB PR) Connect to a TV with Y PB PR inputs. c AV 2 (DECODER) Connect the audio/video output of an external source (Pay-TV decoder, Set Top Box, VCR, etc.). d AC Power Cord Plug into the power source. e ANTENNA OUT Passes the signal from the ANTENNA IN jack to your TV/monitor. Connecting to the antenna Remove the antenna cable plug from your TV set and insert it into the antenna socket at the back of the recorder. Plug one end of the antenna cable into the TV socket on the recorder and the other end into the antenna input socket on your TV set. Aerial SCART INPUT Rear of TV ANTENNA INPUT AUDIO INPUT VIDEO INPUT L R R RF coaxial connection Connect the ANTENNA OUT jack on the recorder to the antenna input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The ANTENNA OUT jack passes the signal through from the ANTENNA IN jack. Rear of the recorder 9 Hookup and Settings Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. When using the COMPONENT OUTPUT jacks, set the Video Output Format option in the setup menu to YPBPR. When using the SCART jack, set the Video Output Format option in the setup menu to RGB. Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution ­ Make sure the recorder is connected directly to the TV. Tune the TV to the correct video input channel. ­ Do not connect the recorder's AUDIO OUTPUT jack to the phono in jack (record deck) of your audio system. ­ Do not connect your recorder via your VCR. The DVD image could be distorted by the copy protection system. SCART connection Connect the AV1 scart jack on the recorder to the corresponding in jacks on the TV using the scart cable (T). Audio (Left/Right) Connection Connect the left and right AUDIO OUTPUT jacks of the recorder to the audio left and right IN jacks on the TV using the audio cables (A). Do not connect the recorder's AUDIO OUTPUT jack to the phono in jack (record deck) of your audio system. Component Video connection Connect the COMPONENT OUTPUT jacks on the recorder to the corresponding input jacks on the TV using an Y PB PR cable (C). If your television is a high-definition or "digital ready" television, you may take advantage of the recorder's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the recorder. Set the Progressive Scan to [ON] on the setup menu for progressive signal, see page 17. Caution Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the recorder. First, remove the disc in the recorder. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. Rear of TV COMPONENT VIDEO INPUT SCART INPUT AUDIO INPUT Y Pb Pr L R C T A Rear of the recorder 10 Connecting to an Amplifier Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUTPUT jacks on the recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A). Rear of the recorder Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) 1. Connect one of the recorder's DIGITAL AUDIO OUTPUT jacks (COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (coaxial X) audio cable. 2. You will need to activate the recorder's digital output. (See "Audio Settings" on page 18). X A COAXIAL DIGITAL INPUT L R AUDIO INPUT Digital Multi-channel sound A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your recorder (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Caution: Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected. Notes: ­ If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. ­ Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. ­ To see the audio format of the current DVD in the on-screen display, press AUDIO. ­ This recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder's digital audio outputs. Amplifier (Receiver) Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the doubleD symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. 11 Hookup and Settings Accessory Audio/Video (A/V) Connections Connecting a PAY-TV/Canal Plus Decoder You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder's mains lead from the mains when connecting the decoder. To watch or record PAY-TV/Canal Plus programmes, set [AV2 Connection] option to [Decoder] (see page 17) and set the program's [Decoder On/Off] option to [On] on the Setup menu (page 16). Tip: You do not need to turn on the recorder to view the signals from the connected tuner on your TV. Note: If you disconnect the recorder's mains lead, you will not be able to view the signals from the connected decoder. TV TV Tip: You do not need to turn on the recorder to view the signals from the connected tuner on your TV. Notes: Pictures containing copy protection signals that prohibit any copying cannot be recorded. If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen. Be sure to connect your VCR to the recorder and your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV. Line input 1 SCART AV VCR RECORDER TV Line input 2 When you record to a VCR from this recorder, do not switch the input source to TV by pressing the TV/DVD button on the remote. Connecting to the AV2 DECODER jack Connect a VCR or similar recording device to the AV2 DECODER jack of this recorder. To watch or record the source from AV2 DECODER jack, set [AV2 Connection] option to [Other Device] (see page 17). If you are using a B Sky B tuner, be sure to connect the tuner's VCR SCART jack to the AV2 DECODER jack. If you disconnect the recorder's mains lead, you will not be able to view the signals from the connected VCR or tuner. 12 Connecting to the AV IN 3 Jacks Connect the input jacks (AV IN 3) on the recorder to the audio/video out jacks on your accessory component, using audio/video cables. Jack panel of Accessory Component (VCR, Camcorder, etc.) AUDIO OUTPUT R L VIDEO OUTPUT Front of the recorder 13 Hookup and Settings Auto Set Up After the POWER is pressed for the first time to turn on the unit or resetting the unit, the Initial Setup Wizard function sets the language, clock and tuner channels automatically. 1. Select a language for the Setup menu and onscreen display. Use v / V to select a language then press ENTER. Using the Home Menu From the Home Menu screen you can access all the Media for playback and recording of the recorder. 1. Press HOME to display the Home Menu screen. The unit will be in TV viewing mode always when the Home menu appears. 2. Use b / B buttons to select a main option you want. Sub options appears. 3. Use v / V and ENTER buttons to select the sub option you want. 2. Please check your antenna connections. Press ENTER to move next step. 4. To exit the HOME menu, press HOME. Setup 3. Use v / V to select a country and press B button then press ENTER while [Start] option is selected. The tuner will automatically cycle through all available channels in the area and place them in the tuner's memory. Start: Displays Setup menu. TV Auto Ch. Scan: See page 15. PR Edit: See page 16. Timer Record: See page 33. Movie DISC: - Displays Title List menu for recordable disc (page 35) - Displays Movie List menu for DivX disc. (page 26) - Plays back Video CD or DVD-Video disc (page 23-25). Photo (See page 28-29) b / B (left/right): Moves the cursor to the previous or next column. v / V (up/down): Changes the setting at the current cursor position. Press ENTER to confirm your setting. 5. Press ENTER while [Close] is highlighted to finish setup. DISC: Displays Photo List menu for disc. Music (See page 27) DISC: Displays Music List menu for disc. Easy Menu Disc Manager: Displays the Disc Settings menu. (See page 20-21) Rec. Mode: Displays the menu to select the record mode. (See page 19) 4. Enter the necessary information for date and time. 14 Initial Settings In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings. General Settings Auto Programming This recorder is equipped with a frequency synthesized tuner capable of receiving up to 88 TV channels. Preparation: Connect the recorder to the desired type of antenna, as shown in Connecting to the antenna on page 9. General Operation 1. Press HOME and select [Setup] option. 2. Select [Start] option then press ENTER. The Setup menu appears. 3. Use v / V to select the desired option. 4. While the desired item is selected, press B to move to the second level. 5. Use v / V to select the second desired option. 6. Press B to move to the third level. 7. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 8. Press RETURN (O) repeatedly to exit the Setup menu. 1. Select the [Auto Programming] option. 2. Press B to move to the third level. [Country] option is highlighted. 3. Use v / V to select a country then press B. If your country is not listed, select [Others]. 4. Press ENTER to begin the channel search. The tuner will automatically cycle through all available channels in the area and place them in the tuner's memory. Note: Press b to go back to the previous level. 15 Hookup and Settings Program Edit You can edit a channel manually (add, delete, name, move, etc.). 1. Select [Program Edit] option then press B. 2. Press ENTER while [Edit] is selected. The Program List menu appears. [MFT] Fine tunes the channel to obtain a clearer picture. [PAL/SECAM] Changes TV signal system (PAL or SECAM). 2. Choose OK then press ENTER to confirm the setting and returns to the Program List menu. AV1 Decoder Sets the AV1 AUDIO/VIDEO jack for inputting encoded video signals. 1. Press AV/INPUT while the [Decoder On/Off] option is highlighted. 2. Press ENTER so [Decoder] appears on the display. Press ENTER again to turn off the setting. Off: Inputs the signals from the AV1 scart jack. Normally select this. On: The encoded video signal input from the AV1 scart jack is output to the AV2 DECODER jack for decoding. The decoded signal is then input back through the AV2 DECODER jack so you can record or view PAY-TV/Canal Plus programmes. 3. Use v / V to select a PR number then press ENTER. 4. Use v / V to select the program option then press ENTER. [Program Edit] Sets the channel manually. See "Program Edit" on the bottom. [Station Rename] Changes the station name. The display for entering characters appears. To enter characters, see page 39. Names can be up to 5 characters long. [Move] Sorts the programme positions on the Program List. Press v / V to move the selected programme position to a new location. [Delete] Disables a programme position you do not need. [Decoder On/Off] Sets the channels for the decoder. You need this setting to watch or record PAY-TV/Canal Plus programmes. Press ENTER so [Decoder] appears on the display. Press ENTER again to turn off the setting. 5. Press RETURN (O) repeatedly to exit Program List menu. Program Edit You can perform a search to select and store TV channels manually. When you select [Program Edit] in step 4 above, the display for setting channels appears. 1. Use b / B to select the item and press v / V to change the setting. Clock Set 1. Select [Clock set] option then press B. 2. Enter the necessary information for date and time. b / B (left/right): Moves the cursor to the previous or next column. v / V (up/down): Changes the setting at the current cursor position. 3. Press ENTER to confirm your setting. TV Aspect Selects the aspect ratio of the connected TV (4:3 standard or wide). [4:3 Letter Box] Select this when connecting to a 4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen. [4:3 Pan Scan] Select this when connecting to a 4:3 screen TV. Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit. [16:9 Wide] Select this when connecting to a widescreen TV or TV with a wide mode function. [PR] indicates the selected programme position. [Seek] Searches for a channel automatically. Searching stops when the recorder tunes in a channel. [Ch.] Changes the channel number. 16 General Settings (Continued) Progressive Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT OUTPUT jacks, but are connecting the recorder to a standard (analog) television, set Progressive Scan to [OFF]. If you are using the COMPONENT OUTPUT jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to [ON]. Note: Progressive Scan will be disable in the setup menu when the Video Output Format in the setup menu is set to RGB. Caution Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the recorder. First, remove the disc in the recorder. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. Power Save Mode You can set up the unit into an economic power save mode. Nothing is displayed in the display window when the unit is turned off. [OFF] Power Save Mode is not active. [ON] Power Save Mode is active. The Power Save Mode is not available in the standby mode for the timer recording and when power off of the unit after receiving the encoded television signals (CANAL+ or PREMIERE). Factory Set If you need to, you can reset the Recorder to all its factory settings. Select ``ENTER'' icon then press ENTER and auto setup menu will appear, see page 14. Note: Some options can not be reset. (Rating, Password, and Area Code) Language Settings AV2 Connection You can connect a decoder or other device to the AV2 DECODER socket on the back. [Decoder] Select [Decoder] if you connect the recorder's AV2 DECODER jack to a PAY-TV or Canal Plus decoder. [Other Device] Select [Other Device] if you connect the recorder's AV2 DECODER jack to a VCR or similar recording device. Display Menu Video Output Format Select the Video output format option according to the connection type of this unit [YPbPr] When your TV is connected with the COMPONENT OUTPUT jack on this unit. [RGB] When your TV is connected with the SCART(RGB signal) jack on this unit. Select a language for the Setup menu and on-screen display. Disc Menu/Audio/Subtitle [Original] Refers to the original language in which the disc was recorded. [Others] To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see page 43). If you make a mistake while entering number, press CLEAR repeatedly to delete numbers one by one then correct it. [OFF] (for Disc Subtitle) : Turn off Subtitle. 17 Hookup and Settings Notes: The encoded television signals (CANAL+ or PREMIERE) are not decoded in the Power Save Mode. Audio Settings Each DVD disc has a variety of audio output options. Set the recorder's Audio Output according to the type of audio system you use. Lock (Parental Control) Settings Rating Dolby Digital / DTS / MPEG [Bitstream]: Select "Bitstream" if you connect the recorder's DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to two-channel PCM audio. [Off] (for DTS): If you select "Off", the DTS signal is not output through the DIGITAL AUDIO OUT jack. Blocks playback of rated DVDs based on their content. Not all discs are rated. 1. Select [Rating] option then press B. 2. To access the Rating, Password and Area Code features, you must input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so. Input a 4-digit code. Enter it again to verify. If you make a mistake while entering number, press CLEAR repeatedly to delete numbers one by one then correct it. 3. Select a rating using the v / V buttons. [1] - [8]: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [No Limit]: If you select [No Limit], parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating selection. Note: If you set a rating for the recorder, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc. Sampling Frequency If your receiver or amplifier is NOT capable of handling 96 kHz signals, select [48 kHz]. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select [96 kHz]. When this choice is made, this unit will pass each type of signal through without any further processing. DRC (Dynamic Range Control) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to [ON] for this effect. 18 Lock (Parental Control) Settings (Continues) Set Password 1. Select [Set Password] option then press B. 2. Follow step 2 as shown "Rating" on page 18. To change the password, select the [Change], press ENTER and input the new password twice after inputing the current password. To delete the password, select [Delete] then input the password. If you forget your 4-digit code If you forget your password, to clear the current password, follow the procedure below. 1. Display Setup menu then select an 1 level icon. 2. Use the Number buttons to enter the 6-digit number "210499". 3. Select [OK] then press ENTER. The 4-digit password is cleared. Enter a new code. Recording Settings Record Mode Set You can set the picture quality for recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality), MLP (Maximum Long Play). Auto Chapter When recording in Video mode, chapter markers are put in specified setting. You can change this interval to 5 minutes or 10 minutes. If you select [None], switch off automatic chapter marking altogether with the [None] setting. Area Code Enter the code of an area whose standards were used to rate the DVD video disc, referring to the list (See "Area Codes", page 43.). 1. Select [Area Code] option then press B. 2. Follow step 2 as shown "Rating" on page 18. 3. Select the first character using the v / V buttons. 4. Shift the cursor using B buttons and select the second character using v / V buttons. 5. Press ENTER to confirm your area code selection. 19 Hookup and Settings Disc Settings Initialize If you load a completely blank disc, the recorder will initialize the disc. DVD-R: The recorder initialize the disc to Video mode. The recording mode will always be Video mode. DVD-RW/DVD+RW/DVD+R: The Initialize menu will appears. Select [OK] then press ENTER. DVD-RW disc is initialized to Video mode. Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below. Finalize Finalizing `fixes' the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing MENU/LIST or TITLE. Caution Once you have finalized a DVD-R and DVD+R disc, you cannot edit or record anything else on that disc except DVD+RW. However, you can record and edit a DVD-RW disc by choosing [Unfinalize] option. 1. Select [Initialize] option then press B. 2. Press ENTER while [Start] is selected. Format Disc menu appears. 3. Use b / B to select a desired mode (VR Mode or Video Mode) then press ENTER. Confirm message will appear. For DVD+RWs, go to step 4. 4. Use b / B to select [OK] then press ENTER. It takes a few moments to initialize the disc. Caution If you want to change the disc format, everything recorded on the disc will be erased. 1. Select [Finalize] option then press B. 2. Press ENTER while [Finalize] is selected. Finalize menu appears. 3. Select [OK] then press ENTER. The recorder starts finalizing the disc. Note: How long finalization takes depends on the type of disc, how much is recorded on the disc, and the number of titles on the disc. Tips If you load a DVD-RW that has already been finalized, you can `Unfinalize' it by choosing Unfinalize from the Finalize menu. After doing this, you can edit and re-record onto the disc. You cannot unfinalize a DVD-R and DVD+R disc. If [Disc Protect] option is set to [ON], the finalize is not available. To finalize, set [Disc Protect] option to [OFF]. 20 Disc Settings (Continued) Disc Label Use this to enter a name for the disc. This name appears when you load the disc and when you display disc information on-screen. The disc name can be up to 32 characters long. For discs formatted on a different recorder, you will see only a limited character set. 1. Select [Disc Label] option then press B. 2. Press ENTER while [Edit] is selected. Keyboard menu appears. To enter characters, see page 39. DivX Registration Code We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. 1. Select [About DivX (R)] option then press B. 2. Press ENTER while [Enter] is selected and the registration code will appear. 3. Use the registration code to purchase or rent the videos from Divx® VOD service at www.divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit. Note: All the downloaded videos from DivX® VOD can only be played back on this unit. Disc Protect When recording in DVD+RW / +R disc or VR mode formatted DVD-RW disc, set to [ON] to prevent accidental recording, editing or deleting of the disc loaded. If you need to unlock the disc to make edits, select [OFF]. PBC PBC stands for Playback Control and refers to special menus and navigation features that are available on some Video CDs. [ON] Video CDs are played according to the PBC, if available. [OFF] Video CDs are played the same way as Audio CDs. 21 Hookup and Settings General Explanation of On-Screen Display This manual gives basic instructions for operating the recorder. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the recorder or is not available on the disc. Displaying Disc Information on-screen You can display various information about the disc loaded on-screen. 1. Press DISPLAY once to show current status. Displaying Information While Watching TV During viewing the TV, press DISPLAY to display/remove the information displayed on-screen. 2. Press DISPLAY once again to show various playback information. The items displayed differ depending on the disc type or playing status. Indicates channel number, station name, and audio signal (MONO) received by the tuner. Indicates the record mode, free space, and elapsed time progress bar. Indicates disc name and format. 3. You can select an item by pressing v / V and change or select the setting by pressing b / B. For details about each item, see the pages in parentheses. [Title]: Current title (or track) number/total number of titles (or tracks) (page 25) [Chapter]: Current chapter number/total number of chapters (page 23) [Time]: Elapsed playing time (page 25) [Audio]: Selected audio language (DVD VIDEO only) or audio channel (page 24) [Subtitle]: Selected subtitle (page 24) [Angle]: Selected angle/total number of angles (page 25) [Sound]: Selected sound mode (page 25) Indicates current audio channel. Indicates current date and time. Note: If no button is pressed for 10 seconds, the on-screen display disappears. 22 Playback General Playback Features 1. Load your chosen disc in the tray, with the playback side down. 2. Starts playback using HOME menu (see page 14). 3. To stop the playback, press STOP (x). The unit records the stopped point, depending on the disc. "Xx" appears on the screen briefly. Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc ("x" appears on the screen.), the unit will clear the stopped point. 4. Press OPEN/CLOSE (Z) to remove the disc. Press OPEN/CLOSE (Z) to close disc tray or press POWER (1), the disc tray closes automatically and unit turns off. Note: If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see "Rating", on page 18). Buttons OPEN / CLOSE (Z) PAUSE/STEP (X) Operations Opens or closes the disc tray. During playback, press PAUSE/STEP (X) to pause playback. Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame. Tip: You can advance or back up the picture frame-by-frame by pressing b / B repeatedly during PAUSE mode. The picture frame-by-frame in reverse is not available for Video CD. Discs All Discs All Discs DVD ALL VCD SKIP (. / >) During playback, press SKIP (. or >) to go to the next DVD ALL VCD DivX chapter/track or to return to the beginning of the current ACD MP3 WMA chapter/track. Press SKIP . twice briefly to step back to the previous chapter/track. Tips: To go directly to any chapter during DVD playback, press DISPLAY twice and press v / V to select the chapter icon. Then, input the chapter number or use b / B. On an Audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback. During playback, press SCAN (m or M) repeatedly to select the required scan speed. DVD; 5 steps Video CD, DivX, Audio CD; 3 steps While the playback is paused, press SCAN (m or M) repeatedly to play in slow motion DVD; 4 steps Video CD; 4 steps (Forward only) DVD ALL ACD VCD DivX SCAN (m / M) DVD ALL VCD ZOOM During playback or pause mode, press ZOOM to enlarge the video image. (x1 size x2 size x4 size x1 size (normal size) You can move through the zoomed picture using b B v V buttons. DVD ALL VCD 23 Playback General Playback Features (Continued) Buttons PLAY MODE Operations For repeat playback During playback, press PLAY MODE repeatedly to select a desired repeat mode. DVD (Chapter/Title/Off) VR mode DVD-RW (Chapter/Title/All/Off) Video CD, Audio CD (Track/All/Off) MP3/WMA (Track/Folder/Off) Notes: On a Video CD with PBC, you must set PBC to [OFF] in the Setup menu to use the Repeat function. See page 21. If you press SKIP (>) once during Repeat Chapter (Track) playback, the repeat playback cancels. For repeat A-B During playback, press PLAY MODE repeatedly to select point A then press ENTER to select point B. Repeats a sequence from point A (Starting point) to point B (End point). To stop the repeat A-B, press PLAY MODE repeatedly until "OFF" appears on the TV screen. Discs DVD ALL VCD MP3 WMA ACD DVD ALL VCD ACD TITLE MENU/LIST SUBTITLE ( AUDIO ( ) ) If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appears. The disc menu appears on the screen. During playback, press SUBTITLE then press b / B repeatedly to select a desired subtitle language. Press AUDIO then press b / B repeatedly to hear a different audio language, audio track or encoding method. Note: Some discs feature both Dolby Digital and DTS soundtracks. There is no analog audio output when DTS is selected. To listen to the DTS soundtrack, connect this recorder to a DTS decoder via one of the digital outputs. See page 11 for connection details. Press AUDIO then press b / B repeatedly during playback to hear a different audio channel (STEREO, LEFT or RIGHT). With DVD-RW discs recorded in VR mode that have both a main and a Bilingual audio channel, you can switch among Main (L+L), Sub (R+R), or Main+sub (L+R). DVD DVD DVD DVD DivX DivX -RWVR -RWVideo +RW -R +R VCD 24 If a menu screen is displayed DVD VCD Camera Angle DVD If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. 1. Press DISPLAY twice during playback. The OnScreen Display appears on the TV screen. 2. Use v / V to select the Angle icon in the OnScreen Display. 3. Use b / B to select a desired angle. The number of the current angle appears on the TV screen. Tip: The ANGLE indicator will blink on the TV screen at scenes recorded at different angles to indicate that angle switching is possible. The menu screen may be displayed first after loading a DVD or Video CD which contains a menu. DVD Use the b / B / v / V buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or MENU/LIST to return to the menu screen. VCD Use the number buttons to select the track you want to view. Press RETURN (O) to return to the menu screen. Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You may also set PBC to [OFF] under Setup menu (see page 21). 3D Surround DVD ALL VCD This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multichannel audio from a home theater system. 1. Press DISPLAY twice during playback. The OnScreen Display appears on the TV screen. 2. Use v / V to select the Sound icon in the OnScreen Display. 3. Use b / B to select "3D SUR". To turn off the 3D Surround effect, select "NORMAL". Moving to another TITLE DVD ALL DivX When a disc has more than one title, you can move to another title as follows: Press DISPLAY twice during playback then use v / V to select the title icon. Then, press the appropriate numbered button (0-9) or b / B to select a title number. Time Search DVD ALL DivX To start playing at any chosen time on the disc: 1. Press DISPLAY twice during playback. The time search box shows the elapsed playing time. 2. Press v / V to select the time clock icon and "-:--:--" appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press b / B to move the under bar (_) to the wrong number. Then enter the correct numbers. 4. Press ENTER to confirm. Playback starts from the selected time. Last Condition Memory DVD This recorder memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the recorder or switch off the recorder. If you load a disc that had its settings memorized, the latest stop position is automatically recalled. Notes: Settings are stored in memory for use any time. This recorder does not memorize settings of a disc if you switch off the recorder before commencing to play it. 25 Playback Playing a DivX Movie File The recorder can play DivX files. Before playing DivX files, read "DivX file requirement" on right. 1. Press HOME. 2. Select [Movie] option. 3. Select a media that contains DivX file(s) then press ENTER. The [Movie List] menu appears on the TV screen. Movie List menu options 1. Press v / V to select a folder/file on the [Movie List] menu then press ENTER. [Movie List] menu options appear. The menu options displayed differ depending on the selected media. 2. Press v / V / b / B to select an option, and press ENTER. [Play] Start playback the selected title. [Open] Opens the folder and a list of files in the folder appears. DivX file requirement Available resolution size: 720x576 (W x H) pixel DivX file extensions: ".avi", ".divx" Playable DivX subtitle: ".smi", ".srt", ".ssa", ".sub (Micro DVD, Subviewer 1.0/2.0)", ".txt (TM player, DVD subtitle system)" Playable Codec format: "DIVX3.xx", "DIVX4.xx", "DIVX5.xx" Playable Audio format: "AC3", "MP3" Sampling frequency: within 8 - 48 kHz (MP3) Bit rate: within 8 - 320kbps (MP3) CD-R Format: ISO 9660 and JOLIET. DVD±R/RW Format: ISO 9660 (UDF Bridge format) Maximum Files/Disc: Less than 2000 Notes on DivX format If the number of the screen frame is over 29.97 frames per second, this unit may not operate normally. If there is impossible code to express in the DivX file name, it may be displayed as "*" mark. If the video and audio structure of recorded file is not interleaved, returns to the menu screen. This unit does not support the DivX file that is recorded with GMC (Global Motion Compensation). This unit does not support the DivX file that contains "rec list". 4. Press v / V to select a folder, and press ENTER twice. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to highlight and press ENTER. 5. If you want to view a particular file, press v / V to highlight a file and press PLAY (N). You can use variable playback functions. Refer to pages 23-25. 6. Press STOP to stop the playback. The [Movie List] menu appears. Notice for displaying the DivX subtitle If the subtitle does not display properly, please follow the steps below. 1. Press PAUSE/STEP when the subtitle appears. 2. Press and hold SUBTITLE about 3 seconds. The language code will appear. 3. Press b / B to select another language code until the subtitle is displayed properly. 4. Press PLAY (N) to continue playback. Note: The DivX subtitle file name has to be identified with the DivX file name to display by this unit. 26 Playing an Audio CD or MP3/WMA file The recorder can play audio CDs and MP3/WMA files. Before playing MP3/WMA files, read "MP3/WMA audio file requirement" on right. 1. Press HOME. The HOME menu appears. 2. Select [Music] option. 3. Select a media that contains MP3/WMA or audio title then press ENTER. The [Music List] menu appears on the TV screen. Audio CD and Music List menu options 1. Press v / V to select a folder/file on the [Music List] menu then press ENTER. The menu options appear. The menu options displayed differ depending on the selected media. 2. Press v / V / b / B to select an option, and press ENTER. [Play] Start playback the selected title. [Random] Start or stop random playback. [Open] Opens the folder and a list of files in the folder appears Random 4. Use v/V to select a track then press PLAY (N). Playback starts. You can use variable playback functions. Refer to pages 23-25. Tips: Press DISPLAY to view ID3-Tag information for the MP3 file. If ID3-Tag information is not present, [ID3-Tag: Not Checked] will appear. If you select a folder, the number of subfolders and number of MP3/WMA files in the folder are displayed. Press DISPLAY again to remove the information screen. If you want to move to the upper directory, use the v / V to highlight and press ENTER. 5. To stop playback at any time, press STOP. 2. Press v / V to select [Random] option then press ENTER. The unit automatically begins random playback and "RANDOM" appears on the menu screen. 3. To return to normal playback, select [Random] option again then press ENTER. Tip: By pressing SKIP > during Random playback, the unit selects another track and resumes Random playback. MP3/WMA audio file requirement File extensions ".mp3", ".wma". Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA) Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA) CD-R Format: ISO 9660 and JOLIET. DVD±R/RW Format: ISO 9660 (UDF Bridge format) Maximum Files/Disc: Less than 2000 27 Playback 1. Press v / V to select a file then press ENTER. The menu options appear. Viewing a JPEG File The recorder can play JPEG files. Before playing JPEG recordings, read "Photo file requirement" on right. 1. Press HOME. The HOME menu appears. 2. Select [Photo] option. 3. Select a media that contains JPEG file then press ENTER. The [Photo List] menu appears on the TV screen. Photo List menu options 1. Press v / V to select a file on the [Photo List] menu then press ENTER. The menu options appear. The menu options displayed differ depending on the selected media. 2. Use v / V to select an option then press ENTER to confirm your selection. [Open] Opens the folder and a list of files in the folder appears [Full Screen] Shows the selected file as full screen. [Slide Show] Displays Slide Show menu. Skip Images While viewing a picture, press SKIP (.or >) once to advance to the next file or return to the previous file. 4. Use b / B / v / V to select a file, then press ENTER. The menu options appear on the left side of the menu. Tip: If you want to move to the upper directory, use the v / V to highlight and press ENTER. 5. Use v / V to select [Full Screen] then press ENTER. The selected image is displayed in full screen. Depending upon the size and number of JPEG files, it could take a long time for the recorder to read the files. Rotate Images Use v / V while viewing a picture to flip the picture clockwise or counterclockwise. Photo file requirement File extensions ".jpg" Photo size: Less than 4MB recommended CD-R Format: ISO 9660 and JOLIET. DVD±R/RW Format: ISO 9660 (UDF Bridge format) Maximum Files/Disc: Less than 2000 Notes on JPEG file Progressive and lossless compression JPEG image files are not supported. Depending on the size and number of the JPEG files, it may take several minutes to read the contents of the media. Press ENTER to appear or disappear this menu during viewing the full screen. 6. To stop viewing at any time, press STOP. The [Photo List] menu appears. Tip: If you press RETURN (O) while menu screen is displaying, the screen is changed to TV viewing or AV input. 28 View Slide Shows 1. Select [Slide Show] option on the [Photo List] menu (Refer to "Photo List menu options" on page 28). 2. Press ENTER. The Slide Show menu appears. 3. Use b / B / v / V to set the options. [Speed] option: Sets the Slide Show speed to [Slow], [Normal], or [Fast]. 4. Select the [Start] option then press ENTER to start the Slide Show. The slide show continues until you press STOP. 5. Press STOP to stop the Slide Show and returns to the Photo List menu. To Pause the Slide Show 1. Press PAUSE/STEP (X) to pause slide show. 2. When you want to continue slide show, press PLAY (N). 29 Playback Recording About DVD recording Notes: This recorder cannot make recordings on CD-R or CD-RW discs. Our company takes no responsibility for recording failure due to power outages, defective discs, or damage to the Recorder. Fingerprints and small scratches on a disc can affect playback and/or recording performance. Please take proper care of your discs. Disc types and recording formats, modes, and settings This recorder can play various kinds of DVD discs: pre-recorded DVD-Video discs, DVD-RW, DVD-R, DVD+RW and DVD+R discs. The disc format for DVD-R, DVD+R, DVD+RW discs is always "Video format"--the same as pre-recorded DVD-Video discs. This means that once finalized, you can play a DVD-R, DVD+R, or DVD+RW in a regular DVD player. By default, the DVD-RW disc format is Video format, though you can change this to Video Recording (VR) format, if required. (Reinitializing the disc will erase the contents of the disc.) The recording mode is closely related to the disc format. If the disc format is Video Recording format, then the recording mode is VR mode; if the disc format is Video mode, then the recording mode is Video mode (except for DVD-Video, which is not recordable, and so does not have a recording mode). Within the recording modes (which are fixed for them whole disc) are the record settings. These can be changed as required for each recording and determine the picture quality and how much space the recording will take up on the disc. If using a DVD-RW disc, make sure you change the recording format (Video mode or VR mode) before you record anything on the disc. See page 20 (Initialize) for how to do this. When using a DVD-R or DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before you start a recording session, check the amount of recording time left on the disc. When using a DVD-RW disc in Video mode, recording time available will only increase if you erase the last title recorded on the disc. The Delete Title option in the Title List (Original) menu only hides the title, it does not actually erase the title from the disc and increase the recording time available (except for the last recorded title on a DVD-RW disc in Video mode). Overwrite recording is available using DVD+RW discs. When using a DVD+R/RW, the recorder will execute the Menu-making operation to update the new title and editing when removing the disc from the recorder or turn off the recorder. Recording time and picture quality There are four preset recording quality modes: XP ­ Highest quality setting, gives about 1 hour of recording time on a DVD (4.7GB). SP ­ Default quality, sufficient for most applications, gives about 2 hours of recording time on a DVD (4.7GB). LP ­ Slightly lower video quality, gives about 4 hours of recording time on a DVD disc (4.7GB). EP ­ Low video quality, gives about 6 hours of recording time on a DVD (4.7GB). MLP ­ The longest recording time with the lowest video quality, gives about 11 hours of recording time on a DVD (4.7GB). Notes: You may see a fragmented picture or distorted subtitle during playing back the contents recorded in EP and MLP mode. If you fully record a recordable DVD disc in MLP mode with only one title, the recordable time is limited as 10 hours. Notes for recording The recording times shown are not exact because the recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter. If you record still pictures or audio only, the recording time may be longer. The displayed times for recording and time remaining may not always add up to exactly the length of the disc. The recording time available may decrease if you heavily edit a disc. 30 Restrictions on copying Some video material is copy-once protected: If you want to record copy-once protected material to DVD, you must use a VR mode DVD-RW disc compatible with CPRM Ver. 1.1. NTSC format signals from the analog input are not recorded correctly with this recorder. Video signals in SECAM format (from the built-in TV tuner or from the analog inputs) are recorded in PAL format. Video that is `copy-once only' can only be recorded using DVD-RW disc in VR mode with CPRM (see below). Copyright Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the area in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE `STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD RECORDER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. What is `CPRM'? CPRM is a copy protection system (with scramble system) only allowing the recording of `copy once' broadcast programs. CPRM stands for Content Protection for Recordable Media. This Recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings can only be played on players that are specifically compatible with CPRM. 31 Recording Basic Recording from a TV Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc is full or you stop the recording. Notes: You must load a recordable disc for DVD recording. This unit can record only a mono audio content from the built-in tuner system. 1. Set a recording mode as necessary by pressing REC MODE repeatedly. (XP, SP, LP, EP or MLP) 2. Use PR/CH (+/-) buttons to select the TV channel to record. 3. Press REC (z) once. Recording will start. (The REC indicator lights in the display window.) Recording continues until you press STOP (x) or the disc is full. To record for a fixed length of time, see Instant Timer Recording on right. 4. Press STOP (x) to stop recording. Instant Timer Recording Instant Timer Recording allows you to make a recording easily of a preset length without using the program timer. 1. Follow steps 1-2 as shown left (Basic Recording from a TV). 2. Press REC (z) repeatedly to select the recording time length. Recording starts after the first press. Each subsequent press increases the recording time within free space. The recording time is displayed on the TV screen. At the end of the recording, the recorder will stop recording and shut off. Checking the Recording Time Press REC (z) once to check the recording time. The recalled setting will automatically return to the TV screen for a moment. Also, remaining time of recording is shown in the display window. To Pause the Recording 1. Press PAUSE/STEP (X) to pause recording. 2. When you want to continue recording, press PAUSE/STEP (X). To Extend the Recording Time The recording time can be extended anytime by pressing REC (z). Each subsequent press increases the recording time within free space. Caution If the recorder is unplugged (or there is a power failure) while the recorder is recording, the recording will be lost. To record one TV program while watching another 1. Press TV/DVD to select the TV mode during recording. The TV indicator appears. 2. Using the TV, select the channel to be viewed. 32 Timer Recording This recorder can be programmed to record up to 16 programs within a period of 1 month. For unattended recording, the timer needs to know the channels to be recorded, the starting and ending time. Note: If you use a completely blank disc for timer recording, you must format the disc before starting timer recording. (Refer to "Initialize" on page 20.) 1. Press HOME and select [TV] option. 2. Press v / V to select [Timer Record] option then press ENTER. The [Timer Record List] menu will appear. 3. Press v / V to select [NEW] option then press ENTER. The [Timer Record] menu will appear. 5. Press ENTER, the program will be memorized by the recorder. To check the programming, the Timer Record List will appear. Check field's "Rec. OK" on the Timer Record List indicates that the timer recording is programmed correctly. 6. Press RETURN (O) to exit the [Timer Record list]. 7. Make sure that you load a recordable disc for DVD recording and press POWER to switch your unit to Standby. Notes: The clock must be set before setting the timer recording. The timer indicator lights in the display window when the recorder is in standby with the timer active. (Nothing is displayed while the [Power Save Mode] is ON.) You must press POWER to stop the timer recording. [Date] Choose a date up to 1 month in advance or desired repeat (Monday ~ Friday, or Every Sun~Sat). [Start Time] Set the start time. [End Time] Set the end time. [Mode] Choose a record mode (XP, SP, LP, EP, MLP or AT). AT (Auto) mode determines how much disc time is available and switches record mode, if necessary, to complete recording the program. 4. Enter the necessary information for your timer recording(s). b / B (left/right) ­ move the cursor left/right v / V (up/down) ­ change the setting at the current cursor position Press RETURN (O) to return to the [Timer Record list]. 33 Recording [PR] Choose a memorized program number, or one of the external inputs from which to record. Checking Timer Recording Details Programming can be checked whenever the recorder is turned on. 1. Press HOME and select [TV] option. 2. Press v / V to select [Timer Record] option then press ENTER. The [Timer Record List] will appear. Use v / V to select a timer recording. Press ENTER to edit the selected program. Timer Record menu appears. Press CLEAR to delete the selected program from the Timer Record List. You cannot enter a timer program when: A recording is already underway. The time you're trying to set has already passed. There are already 16 timer programs set. If two or more timer programs overlap: The earlier program takes priority. When the earlier program finishes, the later program starts. If two programs are set to start at exactly the same time, the program entered first takes priority. If the disc is damaged, the recording may not complete successfully. In this case even though the Check field shows "Rec. OK", it may not be. Recording from an External Input Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the recorder's external inputs. 1. Make sure that the component you want to record from is connected properly to the recorder. See page 12-13. Canceling a Timer Recording You can clear a timer setting anytime before the recording actually starts. Use v / V to select a program you want to erase on the Timer Recorder List. Press CLEAR and the confirm message will appear. Press ENTER while the [OK] is selected to erase the recording. 2. Press AV/INPUT repeatedly to select the external input to record from. Tuner: Built-in tuner AV1: AV1 scart jack mounted on back panel AV2: AV2 DECODER scart jack mounted on back panel AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on the front panel 3. Select the recording mode as necessary by pressing REC MODE repeatedly. (XP, SP, LP, EP or MLP) 4. Press REC (z) once. Recording will start. (The REC indicator lights in the display window.) Recording continues until you press STOP (x) or the disc is full. To record for a fixed length of time, see "Instant Timer Recording" on page 32. 5. Press STOP (x) to stop recording. Note: If your source is copy-protected using CopyGuard, you will not be able to record it using this recorder. See Copyright on page 31 for more details. Stopping a Timer Recording in Progress After a timer recording has started, you can still cancel the program. Press POWER. Timer Recording Troubleshooting Even though the timer is set, the recorder will not record when: There is no disc loaded. A non-recordable disc is loaded. [Disc Protect] option is set to [ON] in the Setup menu. (see page 21). Power is turned on. There are already 99 titles (DVD-RW, DVD-R), 49 titles (DVD+R, DVD+RW) recorded on the disc. 34 Editing Title List and Chapter List Menu Overview Using the Title List menu you can edit video content. The editing features available in the Title List menu depend on whether you are editing video on DVD, and whether you're editing Original content, or a Playlist. There are two ways to edit VR mode DVD-RW discs. You can directly edit the Original content of the disc, or you can create and edit a Playlist. The Playlist doesn't actually change any of the content on the disc, but just controls how the content is played back. 1. Press MENU/LIST to display the Title List menu. Playback should be stopped when you do this. You can also access it using HOME menu, select [Movie] option then select [DISC] option and press ENTER. When selecting titles, use the v / V buttons to display the previous/next page if there are more than six titles. If you are editing a VR mode disc, press MENU/LIST to switch between Original and Playlist menu. On the left side of the screen are the menu options. The main part of the screen shows thumbnails of the titles (or chapter) on the DVD. You can change these thumbnails using the THUMBNAIL button--see Changing Title Thumbnails on page 36. Press DISPLAY to display the information of selected title on the Title List Original menu. After selecting a title or chapter on the Title List or Chapter List menu, then press ENTER. The menu options appears on the left side of the menu. Use v / V to select a option then press ENTER to confirm your selection. 2. To exit the Title List menu, press RETURN (O) repeatedly. 12 34 5 6 1. Menu options: To display menu option, select a title or chapter then press ENTER. The options displayed differ depending on the disc type. [Combine] Combines two chapters into one (page 40). [Delete] Deletes the title or chapter. (page 38) [Delete Part] Deletes a part of the Title (page 38). [Divide] Divides a title into two (page 40). [Full Play] Starts playback of the selected title including the hidden chapters. [Hide (Show)] Hides (or Shows) the selected title or chapter. (page 41) [Move] Moves a chapter on the Chapter ListPlaylist menu to a position on the menu. (page 41) [Play] Start playback of the selected title or chapter. The hidden titles and chapters on the DVD+R/RW cannot be play back. [Playlist Add] Adds the title or chapter to the Playlist. (page 37) [Protect] Protects accidental recording, editing or deleting of the title. (page 41) [Title Name] Edits the title name. (page 39) [Search] - [Chapter]; Displays Chapter List of the Title. - [Time]; Search time for you want start point of the title. (page 39) [Title] Displays Title List of the chapter. 2. Indicates the disc name, record mode, free space, and elapsed time progress bar. 3. Currently selected title. 4. Thumbnail 5. Shows the selected title number and total number of titles. 6. Shows the title name, recorded date, and recording length. 35 Editing VR Mode: Original and Playlist Editing Titles, Chapters and Parts Titles in the disc's original content contain one or more chapters. When you insert a disc's title into the Playlist, all the chapters within that title also appear. In other words, chapters in the Playlist behave exactly as chapters on a DVD-Video disc do. Parts are sections of Original or Playlist titles. From the Original and Playlist menu you can add or delete parts. Adding a chapter or title to the Playlist creates a new title made up of a section (ie., chapter) of an Original title. Deleting a part removes part of a title from the Original or Playlist menu. Caution When editing using the Delete, Add and Move functions, the start and end frames may not be exactly as set in the start and end point display. During Playlist playback, you may notice a momentary pause between edits. This is not a malfunction. Adding Chapter Markers -RWVR +RW +R You can create chapters within a title by inserting chapter marks at the desired points. Note: Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial Setup menu (see "Auto Chapter" on page 19). During recording or playing back, at the point you want to start a new chapter, press CHP ADD. A chapter marker icon appears on the TV screen. Changing the Title Thumbnails -RWVR +RW +R Is editing a DVD like editing a video tape? No. When you edit a video tape you need one video deck to play the original tape and another to record the edits. With DVD, you edit by making a `Playlist' of what to play and when to play it. On playback, the Recorder plays the disc according to the Playlist. Each title displayed in the Title List menu is represented by a thumbnail picture taken from the start of that title or chapter. If you prefer, select a different still picture from within a title. Press THUMBNAIL to make the currently displayed picture the one that appears in the Title List menu. The still picture that you choose appears in both the Original or Playlist menu. About word `Original' and `Playlist' -RWVR Throughout this manual, you will often see the words Original and Playlist to refer to the actual content and the edited version. Original: Content refers to what's actually recorded on the disc. Playlist: Content refers to the edited version of the disc -- how the Original content is to be played. 36 Making a New Playlist -RWVR Use this function to add an Original title or chapter to the Playlist. When you do this, the whole title or chapter are put into the Playlist (you can delete bits you don't need later -- see Deleting an Original or Playlist title/chapter on page 38) The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you add more chapter markers to the Original later, these are not automatically copied over into the Playlist title. You can add up to 999 chapters to one disc. 1. Choose a title or chapter on the Title List-Original menu or Chapter List-Original menu to put into the Playlist, then press ENTER. The menu options appears on the left side of the menu. Adding Additional Title/Chapters to the Playlist -RWVR You can add an Original title or chapter to add to a Playlist title even if it is already registered. 1. Choose a title or chapter on the Title List-Original menu or Chapter List-Original menu to put into the Playlist, then press ENTER. The menu options appears on the left side of the screen. 2. Use v / V to select [Playlist Add] from menu options then press ENTER. 2. Use v / V to select [Playlist Add] option then press ENTER. 4. Repeat steps 1-3 to add additional title or chapter on the Playlist. You can view the added chapters on the Chapter List-Playlist menu. 3. Select [New Playlist] then press ENTER. The new title appears in the updated Playlist. All chapters of the title are added to the Playlist. 5. Press RETURN (O) to exit, or MENU/LIST to go back to the Title List-Original menu. 37 Editing 3. Choose a Title List-Playlist that is already registered to insert a title or chapter, then press ENTER. Deleting an Original or Playlist Title/Chapter When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/chapter remains in the Original menu. If you choose to delete a title or chapter from the Original (title/chapter) menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted from the Original are also removed from the Playlist. Note: It may not be possible to delete chapters that are less than 3 seconds long. 1. Use b / B / v / V to choose a chapter or title you want to delete on the Title List or Chapter List menu then press ENTER. The menu options appears on the left side of the screen. 2. Select [Delete] option from the options on the menu. Deleting a Part -RWVR You can delete a part which you do not want in the title. 1. Use b / B / v / V to choose a title you want to delete on the Title List menu then press ENTER. The options appears on the left side of the menu. 2. Select [Delete Part] in the [Edit] option then press ENTER. Edit (Delete Part) menu appears on the TV screen. [Start Point] icon is highlighted. 3. Use play, pause step, search and slow-motion to find the starting point. 4. Press ENTER at the starting point of the section you want to delete. `End Point' icon is highlighted. The part is indicated on the Progress Bar. 5. Use play, pause step, search and slow-motion to find the ending point. 6. Press ENTER at the ending point of the section you want to delete. You can cancel the selected point, use v / V to select [Cancel] icon then press ENTER. 7. If you finish to edit, select [Done] icon then press ENTER. The confirm message for deleting will appear. Use b / B to select [OK] then press ENTER. The selected part is deleted from the title and Title List menu appears. Note: It may not be possible to delete parts that are less than 3 seconds long. 3. Press ENTER to confirm. The confirm message for deleting will appear. 4. Use b / B to select [OK] then press ENTER. The selected chapter or title is deleted. After pressing ENTER, the new, updated menu is displayed. 5. Repeat steps 1 - 4 to continue to delete from the menu. 6. Press RETURN (O) repeatedly to exit the menu. Notes: When DVD+RW recording, the deleted title's name is changed to `Deleted Title'. If more than two titles are repeatedly deleted, the titles are combined into one. When you are deleting a title or chapter, only the last one on DVD+RW increases remaining recording time. 38 Naming a Title You can name the titles. The names can be up to 32 characters long. 1. Choose the title you want to name on the Title List menu, then press ENTER. The menu options appears on the left side of the menu. 2. Select [Title Name] in the [Edit] option then press ENTER. Keyboard menu appears. Time Search -RWVR -RWVideo +RW -R +R You can select start point of the title. 1. Use b / B / v / V to choose a title on the Title List menu then press ENTER. The options appears on the left side of the menu. 2. Select [Time] option then press ENTER. [Search] menu appears on the TV screen. 3. Enter a name for the title. Use b / B / v / V to select a character then press ENTER to confirm your selection. Use MENU/LIST button to change keyboard type. OK: Select to finish. Cancel: Cancels all entered characters. Space: Inserts a space at the cursor position. Delete: Deletes the previous character at the cursor position. b / B: Moves cursor to left or right. Tip: Remote control buttons for entering a name PLAY (N): Inserts a space at the cursor position. X (PAUSE/STEP): Deletes the after character at the cursor position. x (STOP), CLEAR: Deletes the previous character at the cursor position. . / >: Moves cursor to left or right. Numbers (0-9): Enters the corresponding character at the cursor position. 4. Choose OK then press ENTER to fix the name and return to the previous menu screen. 5. Press RETURN (O) repeatedly to exit the menu. Notes: Names can be up to 32 characters long. For discs formatted on a different recorder, you will see only a limited character set. When recording on DVD-R, DVD+R or DVD+RW discs, the entered name is displayed on the DVD player only after finalization. Current picture End time Selected time Start time Selected point 4. Press ENTER to start selected point. 39 Editing 3. Use b / B to find the point you want to start. The point increase 1 minute step. If you press and hold b / B then the point increase 5 minute step. Divide One Titles Into Two